A loose furniture joint is not always a shortage of glue. Wear, damaged wood, missing fasteners or an earlier repair can change the way the parts fit. Before adding adhesive, decide whether the item can be repaired safely and whether the joint can be inspected without causing further damage.
Identify the joint before choosing an adhesive
Stop using a wobbly chair, stool or other weight-bearing item until it has been assessed. Do not ask someone to sit on it while you watch the joint move. Photograph the looseness and note when it occurs, but avoid repeatedly flexing the parts. That can enlarge damage that might otherwise be repairable.
Look for missing screws, separated rails, splits near the joint and evidence of previous filler or glue. A flat-pack fitting may need its original hardware replaced rather than a wood-glue repair. An antique or veneered piece may need specialist treatment to preserve both its construction and finish.
Adhesive needs a compatible, properly prepared joint. Smearing glue across the visible gap often leaves the important internal surfaces untouched. Filling a large worn space with an adhesive not intended for gap filling can give a reassuring appearance without restoring the connection. The right repair may involve replacing a component or rebuilding a joint, not merely choosing a stronger bottle.
Do not force a joint apart if other parts remain connected. Furniture assemblies can share rails, dowels and concealed fasteners, and levering one area may crack another. A repairer can determine whether disassembly is possible and which old adhesive or finish is present. That information also affects what can be used for a lasting repair.
Plan the holding and curing arrangement
For a genuinely simple, non-safety-critical repair within your skills, use the adhesive manufacturer's instructions for the actual materials. Rehearse the fit and clamping before applying glue. Protect the finish from clamp marks and keep the assembly aligned rather than relying on pressure to pull it into shape.
Allow the specified cure before returning the item to its intended use. A joint that feels firm after a short wait is not necessarily ready for load. If a repaired connection loosens again, stop and seek assessment rather than applying successive layers of different products. Keep the product name and repair date with your furniture notes; they are useful information if professional work is needed later.



